Theknoloji

Tataiso e Pharalletseng ea ho Kena bakeng sa Liboto tsa Magnesium Oxide (MgO).

Selelekela

GoobanMgO Boards e fana ka tharollo e tšoarellang le e se nang tikoloho bakeng sa litlhoko tsa sejoale-joale tsa kaho.Ho kenya ts'ebetso e nepahetseng ho bohlokoa ho matlafatsa matla a bona a ho hanyetsa mollo, ho hanyetsa mongobo, le ho tšoarella ka kakaretso.Tataiso ena e fana ka litaelo tsa mohato ka mohato ho netefatsa ho ts'oaroa le ho kenya ka nepo.

Tokisetso le ho Tšoaroa

• Polokelo:LebenkeleGooban MgOPanelka tlung sebakeng se phodileng, se omeletseng ho sireletsa mongobo le mocheso.Beha liboto tse bataletseng, tse tšehelitsoeng holim'a dunnage kapa matting, ho etsa bonnete ba hore ha li ame fatše ka ho toba kapa ho inama tlas'a boima ba 'mele.
• Ho tšoara:Kamehla u nke mapolanka ka mahlakoreng a bona ho sireletsa mathōko le likhutlo ho senya.Qoba ho bokella lisebelisoa tse ling holim'a mapolanka ho thibela ho kobeha kapa ho senya.

Lisebelisoa le Lisebelisoa Tse Hlokehang

• Likhalase tsa Tšireletso, Mask oa Lerōle, le Liatlana bakeng sa tšireletso ea botho.
• Lisebelisoa tsa ho seha: Carbide Tipped Scoring Knife, Utility Knife, kapa Fiber Cement Shears.
• Lerōle le fokotsang Circle Saw bakeng sa ho itšeha hantle.
• Li-fasteners le li-Adhesives tse loketseng ho kenngoa ho itseng (lintlha tse fanoeng ka tlase).
• Putty Knife, Saw Horses, le Square bakeng sa ho metha le ho seha ho nepahala.

Mokhoa oa ho kenya

1.Acclimation:

• TlosaGooban MgOPanelho tloha liphutheloana 'me u lumelle mapolanka hore a lumellane le mocheso oa kamoreng le mongobo ka lihora tse 48, ka ho khetheha sebakeng sa ho kenya.

2.Ho Beha Boto:

• Bakeng sa foreimi ea tšepe e entsoeng ka mokhoa o batang (CFS), thekesela liphanele ha u ntse u boloka lekhalo la 1/16-inch lipakeng tsa liboto.
• Bakeng sa ho etsa lehong, lumella lekhalo la 1/8-inch ho amohela katoloso ea tlhaho le ho fokotseha.

3.Boithuto ba Boto:

• Gooban MgOPanele tla ka lehlakore le le leng le boreleli le le le leng le thata.Lehlakore le thata hangata le sebetsa e le motšehetsi oa lithaele kapa liphetho tse ling.

4.Ho Seha le ho Lokela:

• Sebelisa thipa e nang le ntlha e nang le carbide kapa sesepa se chitja se nang le lehare la carbide bakeng sa ho seha.Etsa bonnete ba hore likarolo li otlolohile u sebelisa T-square.Etsa likhahla tse chitja le tse sa tsitsang u sebelisa sesebelisoa sa rotary se nang le boto ea samente.

5.Ho fastening:

• Li-fasteners li lokela ho khethoa ho ipapisitsoe le ts'ebeliso e khethehileng le substrate: Beha li-fasteners bonyane lisenthimithara tse 4 ho tloha likhutlong ho thibela ho phatloha, ka li-perimeter fasteners tse ling le tse ling tse 6 le li-fasteners tse bohareng ka lisenthimithara tse ling le tse ling tse 12.
  • Bakeng sa lithupa tsa patsi, sebelisa #8 li-screws tsa hlooho tse bataletseng tse nang le likhoele tse phahameng/tse tlase.
  • Bakeng sa tšepe, sebelisa li-screws tsa ho itšeha tse loketseng tekanyo ea tšepe e kenang.

6.Kalafo ea Seam:

• Tlatsa seams ka polyurea kapa epoxy seam filler e fetotsoeng ha u kenya fatše ho thibela telegraphing le ho netefatsa sebaka se boreleli.

7.Mehato ea Tšireletseho:

• Kamehla roala likhalase tsa tšireletso le mask a lerōle nakong ea ho itšeha le ho etsa lehlabathe ho itšireletsa lerōleng la MgO.
• Sebelisa mekhoa ea ho thibela metsi kapa mekhoa ea ho hloekisa ea HEPA ho e-na le ho fiela ka mokhoa o omileng ho bokella likaroloana tsa lerōle ka katleho.

Lintlha tse khethehileng mabapi le li-Fasteners le Adhesives:

• Li-fasteners:Khetha lisebelisoa tsa tšepe tse 316-stainless steel kapa li-fasteners tse koahetsoeng ka ceramic tse etselitsoeng lihlahisoa tsa boto ea samente ho qoba kutu le ho netefatsa bophelo bo bolelele.
• Likhomaretsi:Sebelisa likhomaretsi tse lumellanang tsa ASTM D3498 kapa khetha likhomaretsi tsa kaho tse loketseng maemo a tikoloho le li-substrates tse amehang.

Litlhahiso tsa ho Qetela:

• Kamehla shebana le melao ea meaho ea lehae le maemo ho netefatsa hore ho latela melaoana eohle.
• Nahana ka ho kenya mokoallo pakeng tsa liboto tsa MgO le liforeimi tsa tšepe ho thibela liphetoho tse ka bang teng tsa lik'hemik'hale, haholo-holo ka masenke.

Ka ho latela litaelo tsena tse qaqileng, li-installers li ka sebelisa liboto tsa MgO ka katleho lits'ebetsong tse fapaneng tsa kaho, ho netefatsa nako e telele, polokeho, le ho latela maemo a tikoloho.